The content of the article:
Knowledge of air conditioner error codes Gree allows you to recognize in time and repair the conditioner without the help of a wizard.
Error codes for Gri air conditioners can be read on the display of the indoor unit of the air conditioner.
Gree air conditioner error codes with indication E
| Air Conditioner Error Code | Mode of operation | Indications on the board of the internal module (flashing, number of times in 3 seconds) | Air Conditioner Errors |
| E1 | Job | 1 | Engine pressure limit |
| E2 | 2 | Prevention of damage to the indoor unit by low temperatures | |
| E3 | 3 | Lack of pressure in the engine | |
| E4 | 4 | Elevated condenser tube temperature | |
| E5 | 5 | Engine protection | |
| E6 Gree air conditioner error | 6 | Wiring failure | |
| E7 | 7 | User mode violation | |
| E8 | 8 | The protection of the evaporator from rising temperatures. | |
| E9 Air Conditioner Error Codes | 9 | Cold air suction warning during heating function | |
| E0 | 10 | Prevention of frequency regulator failures in case of voltage drop |
Other possible errors of the air conditioner
In addition to E series errors, h1 errors and others are also encountered.
| Air Conditioner Error Code | Mode of operation | Indications on the board of the internal module (flashing, number of times in 3 seconds) | Air Conditioner Errors |
| H6 | 11 | There is a fan of the internal module | |
| F0 | Violation of the function of the pressure sensor | ||
| F1 Gree air conditioner error | cools | 1 time | Temperature sensor failed on evaporator |
| F2 | 2 | Capacitor temperature sensor failure | |
| F3 | 3 | Thermal sensor failure on the external module | |
| F4 | 4 | Discharge temperature sensor not responding | |
| F5 | 5 | Compressor Sensor Failure | |
| F6 Gree air conditioning error code | 6 | Condenser temperature increased | |
| F7 | 7 | Prevention of oil spill from the compressor | |
| F8 | 8 | Overload Warning | |
| F9 | 9 | Compressor overheating warning at low speed | |
| Ff | Some wires are de-energized | ||
| H1 | warms up | 1 | Outdoor module heating |
| H2 | 2 | The possibility of failure of the electrostatic precipitator | |
| H3 | 3 | Possibility of compressor overheating | |
| H4 | 4 | System malfunction | |
| H5 Gree air conditioning error code | 5 | IPM Burnout Prevention | |
| H7 | 6 | Compressor is broken | |
| H8 | 7 | Full condensation tray | |
| H9 | 8 | Does not work ten | |
| H0 | 9 | Evaporator overheating hazard | |
| FA | Evaporator temperature increase braking function |
